Question: Is Liquid Chlorine The Same As Shock?

Can you use liquid chlorine to shock your pool?

Answer: I always recommend using liquid chlorine(sodium hypochlorite) to shock your pool every evening because it does not raise Cyanuric acid like tablet chlorine.

However, if you know what you are doing to balance chlorine and Cyanuric acid it’s just fine to use chlorinated tablets..

How much liquid chlorine do I put in a 20000 gallon pool?

The most important factor though is the size of the pool. You’ll need about 52-104 oz of liquid chlorine per 10,000 gallons of water. This amount should get the chlorine level to between 5 and 10 ppm.

How often should I put liquid chlorine in my pool?

For chlorine shock treatment, 3 measuring cups of 40 grams of chlorine granules should be added per 10 m³ of water. Ideally, this should be added after swimming or in the evening to ensure that the product can spread well throughout the pool. Also make sure the water is filtered after you have added the chlorine.

How much liquid chlorine do I need for a 25000 gallon pool?

For example, for my 25,000-gallon pool, I maintain a cyanuric acid level of 30 parts per million (ppm). To raise the free chlorine by 1 ppm, I add about 40 ounces of an 8.3 percent bleach solution, which is about a third of a jug of bleach.

Why is my pool still green after shocking?

My pool has been shocked why is it still green? When pool chemicals are not properly maintained it is easy for pH levels to get out of whack quickly leading to a green pool. If you have already shocked your pool and taken pH level samples you may still need to add stabilizers or phosphate removers.

How long does it take for liquid chlorine to kill algae?

3 daysUse chlorine as your go-to algae killer. This usually works within 1–3 days, but can take up to a week if pool conditions are poor.

Is shock stronger than chlorine?

The most common form of granular shock is called Calcium Hypochlorite, known as Cal Hypo. This type of shock is much stronger than liquid shock typically has 65 to 75 percent available chlorine. … The Granular Dichlor has 56% of available chlorine. This type of pool shock does have to dissolved in a bucket of water.

What is better liquid chlorine or granular?

It depends on a couple of factors. Liquid chlorine (also known as Sodium Hypochlorite) is one of the easiest forms of chlorine to use, as there’s no need for premixing. … Granular chlorine, on the other hand, needs to be dissolved in a bucket of water before being added to your pool.

Is it better to use liquid chlorine or tablets?

It helps that tablets are cost-effective too and have a long shelf life. On the other hand, if you want to go for a simpler way to sanitize your pool without the side effects of CYA and if hauling around gallons of liquid is no problem, then go for liquid chlorine.

Will Liquid chlorine raise pH?

Liquid chlorine does not raise pH. When added to water, liquid chlorine (which has a pH of 13) makes HOCl (hypochlorous acid – the killing form of chlorine) and NaOH (sodium hydroxide), which raises pH. … So the net effect on pH is zero (or almost zero).

Which is better liquid or powder pool shock?

Liquid chlorine and granular shock have the same active chemical that sanitizes your pool, what changes is the strength and the way you use it. Liquid chlorine is less costly, unstabilized and comes in liquid form. Granular shock is stabilized and comes in a solid form that dissolves in your pool.

How much liquid chlorine do you need to shock a pool?

12.5% Liquid Chlorine Pool Shock – Normal Dosage: 1 gallon of shock per 10,000 gallons of water. Shock Dosage: 2 gallons of shock per 10,000 gallons of water. Source: Champion Liquid Pool Shock instructions.

What is the best granular chlorine?

Sodium Dichlor Granular Chlorine (granular spa shock) It is neither excessively acid nor alkaline in character, and does not quickly deplete at higher water temperatures. If you use dichlor, the quick-dissolving fine granular formulation is the best.

How do I make my pool water crystal clear?

How to Make Your Pool Crystal Clear AgainKeep Up with pH and Chlorine Levels. Do you have a water testing device in your supply kit? … Run That Filter. It’s recommended that you run your filter for 8 to 10 hours a day when using your pool. … Skim, Skim, Skim. Yes, something that simple can be the trick to clear water. … Shock the Pool Once a Week.

How long after adding liquid chlorine can you swim?

It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first! Muriatic acid can create a hot spot of acid in the water that could potentially burn or irritate your skin. It is best to wait 30 minutes after adding it to your pool.

How much liquid chlorine do I need for a 5000 gallon pool?

6 ounces initially per 5,000 gallons and a a maintenance dose of . 75 ounces per 3,000 gallons every week. Initially you will need stabilizer to protect the chlorine from the sun.