Quick Answer: How Do I Level My Pool Without Draining?

What is the easiest way to level a ground for a pool?

Remove any rocks or debris from the area — you can do this by hand or with a rake.Take two-by-fours and place them on the site.

Place a level (preferably, one that’s several feet long so that will cover more of the two-by-four) on top of the two-by-fours, in the center, to see where the ground is not level.More items…•.

What is the easiest way to level ground?

If you are leveling a small area, you can tamp the soil using your foot and the bottom of your rake. If you are leveling a large area, or it is especially important to keep the ground level (such as if you are building a structure), get a tamper or plate compactor to compact the soil. Let it settle.

What is the easiest way to level ground for a pool?

Leveling The Ground (Step-by-Step)Step 1: Find The Right Location. … Step 2: Clear The Site. … Step 3: Create Your Leveling Device. … Step 4: Fix The Bumps And Holes. … Step 5: Smooth It Out With Sand. … Step 6: Compact The Sand Down Hard. … Step 7: Lay Your Base Protector Down. … Step 8: It’s Time To Start Setting Up Your Pool.

Why does my Intex pool have 3 holes?

The third hole is probably for a pool filter. My pump did not come with any hoses, so you will have to purchase any hoses needed.

What can I put under my pool to make it level?

Crushed Stone. A better alternative to sand, crushed stone can also be used to level the ground for an above ground swimming pool. Crushed stone is a much easier material to use when leveling the ground than sand and it reduces the chances of critters burrowing under your pool.

How many inches can a pool be unlevel?

Two inches off usually won’t cause any structural issues so you can (and a lot do) just live with your “off level” pool for years. If it’s off more than that though, there can be a problem. Above grounds that are three inches off or more often don’t last.

Why is my pool leaning?

It’s usually possible to correct this problem without taking the pool apart, but not with the pool full of water. Depending on the cause of the leaning post, the pool may have to be just below the halfway point or almost empty. The most common cause of a leaning post is an out of level footplate.

How do I level my above ground pool without draining?

Take some leveling sand for above ground pool and put it into the lower area of the ground to equalize the level of the ground. Wheelbarrow and shovel will help you carry the sand and smoothing the level of the above ground pool.

How level should a pool be?

I don’t usually see above ground pools that are off more than four inches, because they will almost always cave in when the level is off by more than that. Most above ground installation manuals will say that a pool should be level within an inch, but I try to get it level to an eighth of an inch or so.

How do I prepare my yard for an above ground pool?

Proper preparation of your level foundation will yield many summers of fun in the sun.Choose the best area of your yard to set up your pool. … Mark the perimeter of the pool area. … Remove all sod and other vegetation from the area. … Determine the lowest point of the pool area. … Create a wood level.More items…

Can you use sand to level a pool?

The ground should be dug level on virgin soil always. The sand is simply a buffer from the pool liner to the ground. The purpose of the sand is not to level your pool. If you are using sand to level things out you will have nothing but problems.

Should I put pavers under Pool legs?

Yes you DO want pavers under your legs. That will keep them from sinking. The pavers need to be level with the ground so they do not poke your liner.

Will an unlevel pool collapse?

Major Issues with an Unlevel Pool. … The pool will twist, buckle, or even collapse, causing property damage and injury to anyone in or around the pool. Also, the inflatable ring pools are more likely to fold under the force and blow out causing major damage and a safety hazard.

What happens if pool is unlevel?

The water will press with more force on one section of the pool than the others. This uneven weight distribution can buckle, twist or even collapse the pool wall, resulting in property damage and injury to anyone in or around the pool when it fails.

Can you set up a pool on unlevel ground?

Unlevel Intex pools may have one part of the pool lower than other parts, and this unevenly distributes pressure on your pool’s walls. A part of your pool may have the highest weight due to it being on uneven ground. This will can cause your wall to collapse and leave permanent damage on your Intex pool.

Can you put an above ground pool on grass?

Above ground pools can be installed in the space of a few hours and can be set up on sand, ground cloth, concrete or directly on your lawn.

Can you set up an Intex pool on grass?

Installing an above-ground pool on a natural grass lawn is not a good idea, particularly if you plan on taking down the pool for part of the year. There are several reasons why natural grass and above-ground pools do not mix well, but one of the most important is that the pool is going to kill the grass.

How long can you leave a pool on grass?

one dayNever leave the pool up for longer than one day. A pool can smother a grass lawn, preventing it from receiving essential light and air. Empty the pool every night onto the grass that was covered by the pool. That patch of the lawn needs extra care.